Maintenance Lubricants and Penetrating Fluids
Thermo Scientific CAP ICP-OES Corrosion Inhibitor Delo XLI 500ml
CAP ICP-OES Corrosion Inhibitor Delo XLI 500ml
MILLER STEPHENSON CHEMICAL COMPANY INC KRYTOX GPL 206 GREASE 1.1LB
NC2243054 KRYTOX GPL 206 GREASE 1.1LB
Cole-Parmer Fomblin DC976VF Vacuum Grease, Dimethyle siloxane / Silicon dioxide; 5.3 oz
Vacuum grease is a stiff, nonmelting silicone lubricant that maintains its consistency from 40 to 500F. Grease is nonoxidizing and nongumming and has excellent resistance to water and chemicals.
Krayden DC 184 KIT 3.9KG/8.8LB
SYLGARD(R) 184 SILICONE ELASTOMER BASE ,8.8 lb, Dow Corning 184 8.8 lb,Two-part; 10:1 mix; minimal shrinkage; no exothermduring cure; no solvents or cure by-products; deep section cure; repairable; good dielectric properties
Leybold Vacuum Products Inc Leybonol LVO 420 Synthetic Oil, 1 L
Synthetic oil (perfluoropolyether PFPE, free of Additivs). Chemically inert. Highest thermal stability. Pumping axidants like oxygen, ozone or nitrous oxides as well as reactive substances like halogens, hydrogen halides and conditionally Lewis acids.
Ellsworth Adhesive Co SYLGARD 184 SILICONE 3.9KG
2-part, 10:1 mix, transparent encapsulant with good flame resistance. 10:1 mix ratio; flowable; room temperature or heat cure; high tensile strength; same as Sylgard 182 Elastomer but with RT cure capability; UL recognized; Mil Spec approved.
Buehler MASTERPREP 0.05MICRON 64OZ
This item has a minimum qty of 3 per supplier requirements.
MASTERPREP Polishing Suspension, Particle size 0.05m, Steels tool steels, Ni-based alloys, Co-based alloys, Qty 64 oz.
Grainger Viscosity Oil, 157 FSH, Oil Dropper, 1 oz
General purpose lubricants reduce friction and wear, and prevent machinery from overheating. These fluids leave a slippery coating on two surfaces to keep moving parts like wheels, hinges, and gears moving smoothly and extend the life of equipment. Lubricants also provide some protection against water damage, contaminants, and corrosives.
Ted Pella Inc PELCO Conductive Graphite, Isopropanol base, 30g
Conductive graphite paint, primarily designed for SEM sample preparation. The graphite flakes, with an average size of 1µm, are bonded by a cellulose resin with isopropanol as diluent. Good bonding properties on most materials. Graphite content is 20%. Ideal to mount samples on sample stubs or to make a conductive path to the sample surface. Let fully dry before using in the SEM. Maximum service temperature: 200° C.
Smooth On Inc EASE RELEASE 200 1 PK
This item has a minimum qty of 2 per supplier requirements.
SMOOTH ON INC 70020A
INDUSTRIAL PHYSICS PA-03 Adhesive Disks 1000/pack
double-sided adhesive disk to create a leak tight path between the package and the port. Allows the operator to simply and repeatably inse thetest probe into the package for restrained and unrestrained package testing.
Thermo Scientific PUMP OIL/1 LITER BOTTLE
LC/MS Instrument Parts; Oil, forepump, inland 19, 1uL; Thermo Scientific; Replacement part for TSQ Quantum Triple Quadrupole LC/MS